Loading ...
Loading ...
Loading ...
9
IMPORTANT
Turning the refrigerator temperature control
to “0” turns off the compressor and prevents
the refrigerator from cooling, but does not
disconnect the power to the light bulb and
other electrical components. To turn off
power to your refrigerator, you must unplug
the power cord from the wall outlet.
NOTE
Whenrstturningrefrigeratoron,move
refrigerator and freezer controls to Normal.
This is the recommended initial setting. After
24 hours, adjust the controls as needed.
IMPORTANT
Youricemakerisshippedfromthefactory
with the wire signal arm in the ON position.
To ensure proper function for your ice maker,
hook up water supply immediately or turn ice
maker OFF by lifting the wire signal arm until
it clicks and locks in the UP position. If the
ice maker is not turned off and the water
supply is not connected, the water valve
will make a loud chattering noise.
Freezer Control
Normal
Colder
Cold
Refrigerator Control
Normal
Cold Colder
Allow 24 hrs for adjustments
Temperature Adjustment
• Adjust temperature gradually: move the
knob in small increments, allowing the
temperature to stabilize.
Turning the refrigerator control will change
temperatures in both compartments. For
example, if the refrigerator control is turned to a
colder setting, the freezer control may have to be
adjusted to a warmer setting. Turning the freezer
control will change only the freezer temperature.
To maintain temperatures, a fan circulates air
in the refrigerator and freezer compartments.
For good circulation, do not block cold air vents
with food items.
CONTROLSICE SERVICE
If your refrigerator has an automatic ice maker,
noicewillbeproducedduringtherst24hours
of operation. Air in new plumbing lines may
cause the ice maker to cycle two or three times
before making a full tray of ice. With no usage,
itwilltakeapproximatelyonetotwodaystoll
the ice container.
Newplumbingconnectionsmaycausetherst
production of ice cubes to be discolored or have
anoddavor.Discardicemadeduringtherst
24 hours.
Turning your Ice Maker On
After the plumbing connections have been
completed, the water supply valve must be
opened. Place the ice container under the ice
maker, pushing it as far back as possible. Lower
the wire signal arm to its “down” or ON position.
Turning your Ice Maker Off
To stop the ice maker, lift the wire signal
arm until it clicks and locks in the “up” or
OFF position. The ice maker also turns off
automatically when the ice container is full.
NOTE
Automatic ice makers are also optional
accessories that may be installed in most
models at any time. Call your local dealer for
information.
Cool Down Period
To ensure safe food storage, allow the
refrigerator to operate with the doors closed
for at least 8 to 12 hours before loading it with
food.
ON
OFF
Wire
Signal Arm
Refrigerator & Freezer Controls
Loading ...
Loading ...
Loading ...