Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
REMOTE SENSING FEATURE
(on some models).
DO THIS:
ESS REMOTE
SENSING
RT BU-FFON
FAULT CODES:
.........................................................................Y
YOU WILL SEE:
LIGHT pulsing ( On & Off intermittently ).
Note: This feature can be activated from the remote con-
trol ONLY, the unit must be in a cooling mode.
To activate the remote sensing feature, point the remote
control towards the unit and press the remote sensing
Start button. Next, use the "A_v "buttons to set the de-
sired temperature at the remote. (Note that the set tempe-
rature wilt only be displayed on the unit itself ). The LIGHT
on the unit control will pulse to indicate it received the
signal. The LIGHT on the remote control will pulse each
time it sends a signal. It will periodically send this signal
until the feature is deactivated by pressing the remote sen-
sing Stop button. If the unit does not receive the remote
sensing signal during any 3 minute interval, the unit will
beep to indicate the remote sensing mode has ended. The
display on the remote control indicates the temperature at
the remote ONLY.
NOTE: The Remote Sensing function is terminated either
by using the Remote Sensing Stop button or the main
ON/OFF button on the unit.
If the display reads "AS" or "ES", a sensor has failed. Contact your
Authorized Frigidaire Service Center.
TO TURN UNIT OFF:
\
DO THIS:
PRESS ON/
BUTTON
@2009 Electrolux Home Products, Inc. All rights reserved.
Loading ...
Loading ...
Loading ...