Loading ...
Loading ...
Loading ...
7
Operation
B. “-- “ Button
Pressing this button toggles se-
quentially through the three levels
of the replace: ame only; to
ame and low heat; to ame and
high heat.
!
NOTE: After the unit is
switched from ame and high
heat to another function there
is a 30 second fan delay,
where the fan will continue
running before turning off.
C. “O” Button
Pressing this button at any time
will shut the unit off.
D. 3-Position Switch
Switches the operation of the
replace between the different
modes of the replace:
• OFF (center): Makes the unit
inoperable.
• MANUAL (top): All functions
of the replace are controlled
by the On and Off buttons as
described above (B, C).
• REMOTE (bottom): All func-
tions of the replace are con-
trolled by the Remote Control.
E. LED Indicators
Depicts which of the three levels
the replace is currently operating
at: Level 1 , Level 2 or Level
3 .
F. Voltage Selector Switch
Needs to be set to reect the in-
coming voltage to the unit - 115V
or 230V.
!
NOTE: The heater may emit
a slight, harmless odor when rst
used. This odor is a normal con-
dition caused by initial heating of
internal heater parts and will not
occur again.
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
replace off and it will not come
back on without being reset. It
can be reset by switching the On/
Off Switch to Off and waiting ten
minutes before switching the unit
back on.
CAUTION: If you need to
continuously reset the heater,
disconnect power and call
Dimplex customer service at
1-888-DIMPLEX
(1-888-346-7539).
Remote Control
The replace is supplied with a
radio frequency remote control.
Loading ...
Loading ...
Loading ...