Loading ...
Loading ...
Loading ...
Connectdirectlytothefuseddisconnect(orcircuitbreaker
box)throughflexible,armoredornonmetallicsheathed,
coppercable(withgroundingwire).See"MakeElectrical
Connection"section.
Flexiblecablefromovenshouldbeconnecteddirectlytothe
junctionbox.
Fusebothsidesoftheline.
Donotcuttheconduit.Thelengthofconduitprovidedisfor
serviceabilityoftheoven.
AULlistedorCSAapprovedconduitconnectormustbe
provided.
Ifthehousehasaluminumwiringfollowtheprocedurebelow:
1. Connectasectionofsolidcopperwiretothepigtail
leads.
2. Connectthealuminumwiringtotheaddedsectionof
copperwireusingspecialconnectorsand/ortools
designedandULlistedforjoiningcoppertoaluminum.
Followtheelectricalconnectormanufacturer'srecommended
procedure.Aluminum/copperconnectionmustconformwith
localcodesandindustryacceptedwiringpractices.
INSTALLATIONINSTRUCTIONS
Set the oven door(s) aside on a covered work surface.
Decide on the final location for the oven, Locate existing
wiring to avoid drilling into or severing wiring during
installation.
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
2. To avoid floor damage, set the oven onto cardboard prior to
installation. Do not use handle or any portion of the front
frame for lifting.
3. Remove the shipping materials and tape from the oven.
4. Remove the hardware package from inside the bag
containing literature.
5. Remove and set aside racks and other parts from inside the
oven.
6. Move oven and cardboard close to the oven's final location.
IMPORTANT: Use both hands to remove oven door(s).
f. Open the oven door.
2. Locate the oven door latches in both corners of the oven
door, and rotate the latches forward to the unlocked position.
A. Oven door latch in locked
position
B. Oven door latch in unlocked
position
3. Grasp the edges of the oven door with both hands and close
the oven door until it will no longer close. Lift and pull oven
door toward you and remove.
,, .. ........'21+,,+,_,,I_i .,.,.,.,+-=">°................. 14,= ,,,
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death,
fire, or electrical shock.
This oven is manufactured with a neutral (white) power supply
wire and a cabinet-connected green (or bare) ground wire twisted
together.
f. Disconnect power.
2. Feed the flexible cable conduit from the oven through the
opening in the cabinet.
3. Remove junction box cover if it is present.
4. Install a UL listed or CSA approved conduit connector to the
junction box.
A. UL listed or CSAapproved conduit connector
Loading ...
Loading ...
Loading ...