Loading ...
Loading ...
Loading ...
9
USING YOUR CARPET WASHER
1
2
How to Fill the Water Tank
1. Lift the water tank release handle’ upwards. Tilt the water
tank away from the carpet washer and remove. [Fig. 3]
2. Unscrew the water tank cap. Add 1-4 capfuls of Russell
Hobbs cleaning solution. Fill remainder of clean water tank
with warm tap water (max 40°C). Replace cap.
IMPORTANT:
Use only carpet cleaning solution
recommended by Russell Hobbs. Using
incorrect cleaning solutions may cause
excess foaming. Excessive foam will
prevent the machine from working
effectively. Using other solutions will void
the warranty. We cannot be held liable for
damage caused by using a secondary
cleaner.
3. Place Clean Water Tank back to original position and press down
release handle for security.
Caution: Do not use the Carpet Washer without the Clean Water
Tank in position
Check for Colour Fastness
Before cleaning the carpet, test for colour fastness. Dampen a white
cloth with solution and test a small inconspicuous area. Gently rub
the cloth over the area. Check for colour bleeding. If the cloth
remains clean, it should be safe to clean the carpet.
Fig. 3
Loading ...
Loading ...
Loading ...