Loading ...
Loading ...
Loading ...
11
Tools Necessary:
>
'_i_" AND
Phillips" Head
3/8" FL'<ed
Wrench
Before you start:
1 Make sure the electrical power cord is unplugged from the wall outlet.
2 Open both doors and remove the toe grille (see page 8).
3 Remove any food from the door shelves.
4 Close the doors.
To remove the refrigeratordoor:
1 Remove the top hinge screw on the refrigerator door and remove the cover.
2 Trace lightly around the door's top hinge with a pencil. This makes reinstallation
easier.
3 Remove the two screws from the top hinge. Lift the door off of the bottom hinge and
set it aside.
4 Remove the three bottom hinge screws and hinge, if necessary.
To remove the freezer door:
1 Remove the top hinge screw on the freezer door and remove the cover.
2 Detach the multi-wire cable connector located above the top hinge. Grasp both sides
of the connector firmly and pull apart.
3 Trace lightly around the door's top hinge with a pencil. This makes reinstallation
easier.
4 Detach the water tube from the connector located below the freezer door. The
connector releases when you press its outer sleeve inward.
5 Remove the screws from the top hinge and pull the multi-wire cable through it.
6 Lift the door off of the bottom hinge. Lay the door on its side to avoid damage to the
water tube extending from the bottom edge.
7 Remove the three bottom hinge screws and hinge, if necessary.
8 Reverse this procedure to reinstall freezer door.
To reinstall the refrigerator and freezer doors, reverse the above steps.
TO DISCONNECT
1 Press outer sleeve
toward cqnrlector _
@
2 Pull to remove tube
TO CONNECT
k/sert tube and push
until mark touches
face of connector
wm
H_nge
Mumti-wire ___._ Screws
Cable _
i [ Hinge
Loading ...
Loading ...
Loading ...