Loading ...
Loading ...
Loading ...
21
22
B
x3
C
x1
Ex1
19
E
x1
Bx2
Cx1
Bx1
21
From inside of grill head, use two truss head screws 1/4-20x5/8" (B) to attach side shelf to grill head through front and back
holes. Use one truss head screw 1/4-20x5/16" (C) to attach through center hole. From the inside of the shelf front panel as
shown below, use one truss head 1/4-20x5/8" (B) and one 1/4" flat washer (E) to attach the shelf panel to the main control
panel. Tighten the two screws loosened in the previous step.
Desde adentro de la cabeza de la parrilla, utilice dos tornillos de cabeza segmental 1/4-20 x 5/8"(B) para sujetar el estante
lateral a través de orificios anterior y posterior de la parrilla. Utilice un tornillo de cabeza truss 1/4-20 x 5/16"(C) para conectar
a través del centro. Desde el interior del panel frontal como se muestra a continuación, utilice una armadura de cabeza 1/4-
20 x 5/8"(B) un 1/4 Arandela plana (E) para sujetar el panel del estante al panel de control principal. Apriete los dos tornillos
aflojados en el paso anterior.
Open grill head lid. Loosen but do not remove the two screws on the outside surface of the grill head. Place the slotted holes
on side shelf over the two screw heads and drop down. Do not tighten screws until end of next step.
Abra la tapa del cabezal de la parrilla. Afloje sin retirar los dos tornillos de la superficie exterior del cabezal. Alinee los
agujeros ranurados de la repisa lateral con la cabeza de los dos tornillos y deje caer la repisa. No apriete los tornillos hasta
que no termine el siguiente paso.
Loading ...
Loading ...
Loading ...