Loading ...
Loading ...
Loading ...
esatto.house
11
The temperature controls are located on the inside of the refrigerator.
The Thermostat Controls
A) Setting: Use the button to cycle through the temperature settings in the following order: 1, 2, 3, 4, 5
• 1: The warmest temperature setting
• 2–3: Normal operation (adequate for most situations)
• 4: The coldest setting for daily operation
• 5: Super Cool is used to get to a colder temperature in a quicker timeframe
Note: During high ambient temperatures (i.e. on hot summer days) it may be necessary to set the
thermostat to the coolest setting (position 5).This may cause the compressor to run continuously in order
to maintain a low temperature.
When there is a failure the LED light displays show the fault code according to the following;
• LED 5 & 4 Flashing: Temperature sensor failure in refrigerating chamber.
• LED 5 &3 Flashing: Deforst temperatire sensor failure in freezer chamber.
• LED 5 & 2 Flashing: The ambient temperature sensor failure.
Damper Adjusting Slider
The initial position of the damper adjusting slider is on the far right side.
For better user experience, it is recommended to push the slider to the right position and turn the SETTING
KEY to MID position. If it is not enough cool inside the refrigerator compartment, please check whether the
slider is in left position,turn the slider to the right side.
Using for the First Time
Before plugging in your refrigerator, keep it still for 2 hours. Once plugged in give your refrigerator time to
cool down completely before adding food. It is the best to wait for 2-3 hours or for over 4 hours in summer or
when the ambient temperature is high.
Using Your Fridge
Loading ...
Loading ...
Loading ...