Loading ...
Loading ...
Loading ...
Guide pin hole
1
Pinion gear
SETTING S
Special Stitch DP,d - Red Dot
Stitch Width Cor_rol - i _o i
Feed E)o!_s - D_:-.._,m
Satin-', S',.ii__h F-oat
Guide
Remove regular cover plate and
insert buttonhole cover plate.
Select desired size of buttonhole
by turning disc as shown Length
of buttonhole appears in window
on top side of guide plate Screw
guide pin on guide plate into guide
pin hole on machine bed,
Fig. 2
Fig, 3
_ Fi_ 4
Pull guide plate aII the way for-
ward so that guide pin is at S.
This will enabte you to start at one
end of the buttonhole Drop guide
plate into place over the pinion
gear
Pick up bobbin thread through
guide plate by turning hand wheel
and drawing thread to back of
machine. Place fabric between
presser foot and guide plate Line
up edge of fabric with marked
indentation on guide See Fig 4
if you wish all buttonholes to be
3/4 inch from edge of garment,
line up fabric with 3/4 inch mark-
ing each time you start sewing a
buttonhole
Always make a practice buttonhole on a scrap of fabric you plan to use Try
the buttonhole with the button you will use
Always use an interfacing in area of garment where buttonholes are placed
Tissue paper or regular interfacing can be used Tear paper away after stitching,
if it is used,
For heavier weight fabrics, loosen your top tension slightly and use a wider
stitch width setting
Loading ...
Loading ...
Loading ...