Loading ...
Loading ...
Loading ...
6
INSTALLATION INSTRUCTIONS
Before Using your Appliance
• Remove the exterior and interior packing.
• Before connecting the appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Install the handle on the door, if it is not already attached.
Installation of your Appliance
• The appliance is designed free standing installation for indoor use.
CAUTION: This appliance is not designed for the storage of medicine or other medical products.
• Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level
the unit, adjust the front leveling legs.
• Keep 4” of space between the back and the sides of the unit and 11” at the top to allow proper air
circulation to cool the compressor and condenser.
• Keep away from heat and avoid direct sunlight. Do not place the unit in moist or watery places to
prevent rust or reduction of insulating effect.
• Plug the appliance into an exclusive, properly grounded wall outlet.
Leveling your Appliance
Adjust the left and right front leveling feet to ensure your refrigerator-freezer is on a horizontal level.
• Turn the front leveling feet clockwise to increase the height of your refrigerator-freezer.
• Turn the front leveling feet counterclockwise to lower the height of your refrigerator-freezer
Loading ...
Loading ...
Loading ...