Loading ...
Loading ...
Loading ...
11.1 TROUBLESHOOTING GUIDE
Problem Possible Cause Remedy
Engine does not start. Start/stop lever not pressed.
Spark plug is defective.
Cutting blade is worn or
damaged.
Fuel tank is empty.
Engine may be flooded.
Press start/stop lever.
Replace spark plug.
Replace it by contacting
Draper or service agent.
Refill with fuel.
Remove plug and dry.
Machine vibrates in use. Screws are loose.
Blade fasteners are loose.
Blade is unbalanced.
Check screws.
Check blade fasteners.
Replace blade.
Engine runs unsteadily. Air filter is soiled.
Spark plug is soiled.
Clean the air filter.
Clean the spark plug.
Uneven mowing results. Blade is blunt.
Cutting height is too low.
Re-sharpen or replace
the blade.
Set higher.
Mower does not pick up
grass cuttings.
Blade is worn.
Grass bag is full or clogged.
Cutting height is right.
The grass is wet.
The discharge channel/
housing is blocked.
The underside of the deck
is clogged.
Replace the blade.
Empty the grass bag.
Correct the cutting height.
Allow the grass to dry.
Clean the discharge
channel/ housing.
Clean the underside of
the deck.
Loading ...
Loading ...
Loading ...