Loading ...
Loading ...
Loading ...
11 - ENG
H. Frame
I. Pump Outlet
J. Pump Inlet
K. Quick Connect Nozzles
L. Dial-N-Wash
®
Adjustable Pressure Regulator (if equipped,
not shown)
:
Use the Dial-N-Wash to increase and decrease the pressure. Refer to the Dial-
N-Wash Adjustmentparagraph.
BASIC ELEMENTS OF AN ENGINE
Refer to the Engine Owner’s Manual for location and operation of enginecontrols.
Choke Control: Opens and closes carburetor chokevalve.
Starter Grip: Pulling starter grip operates recoil starter to crankengine.
Engine Switch: Enables and disables ignitionsystem.
ASSEMBLY INSTRUCTIONS (FIG. 2 – 4)
1. Locate and remove all loose parts from thecarton.
2. Cut four corners of the carton from top to bottom and lay the panelsflat.
3.
Place handle (G) onto frame (H), depress the snap buttons, and slide the
handle assembly onto the frame until snap buttons snap intoplace.
G
H
2
Q
K
2B
2A
NOTICE: Risk of personal injury. Avoid placing hands between handle and frame
when assembling to preventpinching.
4. (If needed) Mount the gun holster to the upright frame tube using the saddle
bolt and knob provided, see Figure 2A.
5. Remove the colored quick-connect nozzles (K) from the plastic bag and insert
them into correct grommet on the nozzle holder. Nozzles are color coded to
match colored nozzles on label (Q).
6. Connect wand (E) to gun (D). Tightensecurely.
7. Attach high pressure hose (C) to gun (D). Tightense cure ly.
E
4
D
C
3
D
Loading ...
Loading ...
Loading ...