Loading ...
FEATURES
This fifty-bottle wine cooler is designed to accept 25 oz liq. (750 ml) bottles up to 12.5" (315mm) tall.
The temperature settings are between 45°F and 64°F (7°C and 18°C). Temperature selection, °F or °C,
switchable. Interior light operated by external button.
SAFETY
- Household Use Only.
- This unit is an indoor appliance. DO NOT use OUTDOORS.
- There must be at least 5” (127 mm) clearance around the unit to ensure proper ventilation.
- Place unit on a flat surface, away from heat sources
- Do not use the appliance if the plug or cable is damaged. If the power cord is damaged and/or is mal-
functioning, please contact the manufacturer.
- Pull the plug out of the outlet to disconnect. DO NOT pull the cord.
- Do not touch the plug with wet ha
nds.
- Never clean appliance parts with flammable fluids. Do not store or use gasoline or any other flam-
mable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire
hazard or explosion.
- Unplug the appliance when not in use.
Use of extension cords
Because of potential safety hazards under certain conditions, we strongly recommend against the use of
an extension cord. However, if you must use an extension cord, it is absolutely necessar
y that it is a UL-
listed (in the United States) or a CSA-listed (in Canada), 3-wire grounding type appliance extension cord
having a grounding type plug and outlet and that the electrical rating of the cord is 15 amperes (mini-
mum) and 120 volts.
SPECIFICATIONS
Power Requirements: AC 115V 60Hz 110W
Capacity: 50 x 750 ml (25.4 oz) bottles
Max. Temp.: 18°C +/- 3°C (64°F +/- 5°F) at 22°C (72°F) ambient air temp.
Min. Temp.: 7°C +/- 3°C (45°F +/- 5°F) at 22°C (72°F) ambient air temp.
Weight: 43.65 kg (96.24 lbs)
INSTALLATION
• Choose a location where there is an electrical outlet within reach of the power cord. There must be
at least 5” (127 mm) clearance around the unit to ensure proper ventilation. Avoid locations in di
rect
sunlight, moist or extreme cold areas.
• Before connecting the appliance to the power source, let it stand upright for approximately
2 hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
OPERATING INSTRUCTIONS
The preset temperature at the factory is 50°F (10°C) and it will show on the display when you press
the UP and DOWN buttons for the first time. The wine cooler should be placed where the ambient
temperature is between 59° to 77°F (15 to 25 °C). If the ambient temperature is above or below this
range, the performance of the unit may be affected. For example, placing your unit in extreme cold or
hot conditions may cause interior temperatures to fluctuate.
• To turn ON/OFF the appliance, press the ON/OFF button.
• The temperature preset at the factory is 50°F (10°C).
• You can t
urn the interior light on or off by pushing the ‘LIGHT’ button.
• Make sure the unit is unlocked. The lock/unlock key - When you press and hear 2 short “beeps” this
means that the board is locked if you press the ‘LOCK’ for one second and hear a long “beep” the
board will unlock.
• This unit has the option to display temperatures in either Celsius or Fahrenheit. To change
the setting of the unit from °F to °C (or vice versa) press simultaneously the ‘ON/OFF’ and ‘LOCK’
buttons for 3 seco
nds.
• Set the desired cooling temperature by pressing the button ‘UP’ or ‘DOWN’ to set your desired tem-
perature. Each depression of the buttons will scroll through the available temperature settings in
increments of 1 degree.
• For sparkling wine the temperature should be set between 45°-47° F (7°-8°C)
• For white wine the temperature should be set between 48°-54° F (9°-12°C)
• For red wine the temperature should be set between 55°-65° F (13°-18°C)
NOTES
• If the unit is unp
lugged, power loss, or turned off, you must wait 3 to 5 minutes before restarting. If
you attempt to restart before this interval the Wine Cooler will not start.
• When you use the wine Cooler for the first time or restart the wine Cooler after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time.
Once the wine Cooler is runn
ing for a few hours everything will return to normal.
• The zone temperature may have a difference of +/- 5°F (+/- 3°C) from setting depending on loading
and ambient conditions.
WARNING
Be careful when using the touch screen panel. Please protect the panel to avoid scratches, and
install the unit far away from strong magnetic fields and high humidity areas, these conditions may
prevent the wine cooler from working properly.
32
LOCK UP WINE ON WINE DOWN LIGHT
TYPE OFF TYPE
DOWN TEMP UPPER LOWER TEMP UP
ZONE ZONE
Loading ...