Loading ...
Loading ...
Loading ...
LAUNDRY TUB DRAIN SYSTEM Do not store or operate washer at or
below 32°F (0°C) (some water may
Check location where washer will be remain in washer), See page 33 for
installed. This washer can be installed us- winterizing information.
ing one of three systems: Proper installation is your responsibility.
• Laundry tub drain system (below) Make sure you have everything neces-
• Standpipe drain system (p. 13) sary for correct installation including the
• Floor drain system (p. 13) following points:
Grounded receptacle: Must Hot and cold water faucets:
be within 4 ft (1.2 m) of where Must provide water pressure
the power cord is attached to between 5-100 psi and be
the back of the washer, within 4 ft (1.2 m) of the hot
and cold water fill valves
attached to the back of the
washer.
Laundry tub drain system:
Needs a minimum 20 gal
(76 L) laundry tub.
39 in
(99 cm)
Support: Floor must be sturdy
enough to support a total weight
of 315 Ibs (143 kg) (includes
washer, water, and load weight).
J
Level floor: Maximum
allowable slope under entire
washer- 1 in (2.5 cm).
Top of tub must be at
least 39 in (99 cm)
above floor and no
higher than 96 in
(2.4 m) from bottom
of washer.
12
Loading ...
Loading ...
Loading ...