Loading ...
Loading ...
Loading ...
Door Removal and Reversal Instructions
Ooor_op Handb
Hingle Hi •
Screw Celdet
tOOlsNecessQry:
PhllllOS"head _
Quadr_x _eao
screv_rber
Screws TOp Hin_
Cover
_ Top Hinge
Cabinet Hole
Plugs
Hinge Hole Handle Hole
Plug
Door
Hinge
Pin
Center
Handle
Hole
Door Stop Door
Stop
Hinge
_Pin
Bottom
-_ Screws
_ rille
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
NOTE: The direction in which your refrigerator doors open (door swing)
can be reversed, from left to right or right to left, by moving the door
hinges from one side to the other, Reversing the door swing should be
performed by a qualified person.
IMPORTANT: Before you begin, turn the refrigerator temperature control
to "O"and remove the electrical power cord from the wall outlet. Remove
any food from door shelves.
1. Remove toe grille and top hinge cover.
2. Remove top hinge with 3/8" hex driver and lift freezer door off ol
center hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save for
"eassembly.Ensure plastic washer stays on hinge pin.
4. Lift refrigerator door off of bottomhinge and set aside.
5. Remove center hinge and shim by removing inside screw and
oosen_ng two outside screws enough to allow hinge and shim to
slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove
inside screw and installcenter hinge.
7. Remove bottom hinge with 3/8" hex driver. Reinsert two outside
screws in holes anc tighten. Insidescrewwillgotooppositeside
n step 8.
8. Remove two outside screws on opposite side of refrigerator and
install bottom hinge. Insert and tighten screw saved from step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin
to other hole in hinge and tighten with adjustable wrench.
10. Reverse door handles see _nstruct_onson next page).
11. k4ove freezerand refrigeratordoor stops to opposite side. Before
starting screws use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center
qinge penthrough center hinge intotop of door. Close refrigerator
door to help align hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite side of
door while tightening screws to installtop hinge.
17. Replace toe grille and top hinge cover.
18. Plugin electrical 3owercordandtum refrigeratortemperaturecontrol
to center position. Adjust setting as necessary.
Loading ...
Loading ...
Loading ...