Loading ...
Loading ...
Loading ...
24
INSTALLATION
THIS WATER HEATER IS NOT SUITABLE FOR POOL HEATING
INSTALLATION STANDARDS
The water heater must be installed:
by a qualified person, and
in accordance with the installation instructions, and
in compliance with Standards AS/NZS 3500.4, AS/NZS 3000 and all local
codes and regulatory authority requirements.
All packaging materials must be removed from the water heater prior to its
installation. This includes the removal of the cardboard base of the carton from
the underside of the water heater.
WATER HEATER APPLICATION
This water heater is designed for use in a single family domestic dwelling for the
purpose of heating potable water. Its use in an application other than this may
shorten its life.
If this water heater is to be used where an uninterrupted hot water supply is
necessary for the application or business, then there should be back-up
redundancy within the hot water system design. This should ensure the continuity
of hot water supply in the event that this water heater was to become inoperable
for any reason. We recommend you provide advice to the system owner about
their needs and building back-up redundancy into the hot water supply system.
WATER HEATER LOCATION
The water heater is suitable for either
indoor or outdoor installation, except a
water heater supplied with a power
supply cord and plug is suitable for indoor
installation only. Whether located
outdoor or indoor, the water heater
should be installed close to the most
frequently used outlet and its position
chosen with safety and service in mind.
Clearance must be allowed for servicing
of the water heater. The water heater
must be accessible without the use of a
ladder or scaffold.
Loading ...
Loading ...
Loading ...