Loading ...
Loading ...
Loading ...
- 7 -
01/2021
Copyright © 2021, Fast ČR, a.s.
ADVICE AND TIPS
■ When using acomb attachment, start cutting with the largest cutting height and
then gradually reduce the set hair cutting height.
■ Record the used height setting for certain hairstyles so that you do not need to
spend time adjusting it the next time.
■ It is most effective to cut counter to the direction of hair growth.
■ Because hair grows in various directions, it is also necessary to move the hair clipper
in various directions (upwards, downwards or crosswise).
■ Repeat individual passes so that you cut also the hair that you did not cut in the
previous passes.
■ Ensure that the flat part of the comb attachment is in full contact with the scalp. This
will ensure an even haircut result.
■ To achieve good results on curly, sparse or long hair, you can try using acomb to
lead the hair towards the hair clipper.
■ Trim beards by slowly moving counter to the growth direction of the beard, going
from the bottom upwards. When trimming beards using acomb attachment, keep
in mind that the comb attachment must be in constant contact with the skin in
order to ensure an even cut. After reattaching an attachment on to the cutting unit,
do not forget to set the cutting height again.
■ Regularly clean away hair and whiskers from the cutting unit. In the event that
alarge amount of hair or whiskers accumulates in the cutting blade, take it off the
hair clipper and blow or tap the hair or whiskers out of it.
CLEANING AND MAINTENANCE
■ Turn the hair clipper off prior to cleaning it. Never clean the hair clipper when it is
charging and connected to the power supply.
■ Regular cleaning after every use will ensure its proper operation.
Attention:
This hair clipper is not designed to be washed under awater tap.
Do not spray the hair clipper or its power adapter with water or
any other liquid or submerge it in water or any other liquid.
CLEANING THE CUTTING UNIT
■ If the comb attachment is mounted on the cutting unit, remove it.
■ Use the cleaning brush A11 to remove all hair and whiskers from the cutting unit.
■ Remove the cutting unit from the hair clipper according to figure D. First release the
cutting unit by applying pressure against the cutting blades in the direction from
the handle (1) and then slide out its bottom part from the cut-out in the handle (2).
Attention:
The edges of the cutting unit are sharp, pay increased attention
when handling them.
■ Use abrush to remove all hair or whiskers from the cutting unit and from the inner
area of the hair clipper underneath the cutting unit.
■ After cleaning it, attach the cutting unit back on to the handle of the hair clipper
A6, see figure E. Insert the tab on the underside of the cutting unit into the cut-out
in the handle of the hair clipper (1) and then push the cutting unit against the hair
clipper (2) until you hear an audible click.
CLEANING THE COMB ATTACHMENT
■ Clean aused comb attachment using abrush or rinse it under running lukewarm
water. After washing it, carefully wipe it with asoft, dry cloth and then allow it to
dry naturally.
CLEANING THE HAIR CLIPPER
■ The hair clipper unit can be cleaned using aclean dry cloth. In the event that it is
very dirty, you can use alightly dampened cloth. Then thoroughly wipe the cleaned
surface dry.
■ To clean the power adapter, use aclean, dry cloth.
■ For cleaning, do not use brushes with hard bristles, cleaning products with an
abrasive effect, solvents, etc. Otherwise, the cleaned surface may be damaged.
LUBRICATING THE CUTTING UNIT
■ To ensure correct movement of the cutting unit, it is recommended to regularly
lubricate the cutting unit.
■ If acomb attachment is mounted on the cutting unit, remove it. Apply two drops
of lubricating oil on to the cutting unit and spread it out evenly. Wipe off excess oil
using aclean, dry cloth.
Attention:
Store the lubricating oil away from fire sources and out of
children'sreach.
Do not ingest the lubricating oil and prevent it from coming into
contact with the eyes. If contact with the eyes does occur, rinse
them out with cold water and if necessary seek medical help.
Note:
After using up the supplied oil, you can use an oil that does not contain
acids, e.g. sewing machine oil.
STORAGE
■ When you have finished using it, you can store the hair clipper with all its accessories
in a suitable location out of children's reach. Keep the hair clipper away from
extreme temperatures, direct sunlight and excessive humidity. Do not use in an
overly dusty environment.
TECHNICAL SPECIFICATIONS
Hair clipper
Built-in battery..............................................................................................Li-ion, 3,6 V, 2 500mAh
Dimensions (width × depth × height) .......................................................... 191 × 49 × 45 mm
Weight ................................................................................................................................................ 172g
Noise level ...................................................................................................................................72 dB(A)
Electrical shock protection class ....................................................................................................... III
Power adapter
Input ...................................................................................................... 100-240 V AC, 50/60 Hz, 0.3 A
Output ....................................................................................................................... 5 V/DC, 1.2 A, 6 W
Safety class for electrical shock protection ..............................................................................IP20
The declared noise emission level of the appliance is 72 dB(A), which represents alevel
Aof acoustic power with respect to areference acoustic power of 1 pW.
Explanation of technical terminology
Safety class for electrical shock protection:
IP20 – The appliance is constructed in such a way that it is not possible for any
dangerous live parts of the appliance to come into contact with the human body and
at the same time the appliance is protected against the damaging effects of water that
could enter into the appliance.
Product with protection class III: product is designed for separated/
safety extra-low voltage. Electrical shock protection is provided by
separated/safety extra-low voltage.
Changes to text and technical parameters are reserved.
DISPOSAL OF USED BATTERIES
Prior to handing over the hair clipper at aspecialised collection facility, it is necessary
to ensure that the built-in battery is removed. Battery removal will be performed at the
authorised service centre. In the event that the product has been disassembled for the
purpose of ecological disposal then it must not be reassembled.
This symbol indicates that used batteries do not belong in ordinary
municipal waste. Hand over used batteries to designated collection
points for proper disposal. Correct disposal of batteries will help
prevent negative impacts on the environment and human health.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of
used batteries, request the necessary information about the correct
disposal method from the local authorities or from your vendor.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling, hand
these products over to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic devices, ask your retailer or supplier for
the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.