Loading ...
Loading ...
Loading ...
Operation of electronic models (model GSD4000 Only)
Using the Dishwasher Door
_The door must be closed and locked into placeto select a LOADSELECTIONor an OPTION.
Ifthe door isopenedduring a cgcleand left open,thedishwasherwill beeponceevery30 secondsuntilthe
door iscosed and archedinto p ace.
Start
Close and latch the doon Touch the START/RESET pad to begin the cycle. Water fill begins and
approximately 60 seconds later the wash action begins.
NOTE:The dishwasher remembers your last cycle so you don't have to reprogram each time. When
the dishwasher is loaded and the door latch is in the locked position, the control panel lights will be ON
and display the last settings you selected.
If gou don't want to change any of the settings, simply touch the START/RESETpad to begin
the cycle.
Also, if a power failure occurs, NORMAL and HEATEDDRYwill automatically be programmed.
Make any new selections and touch the START/RESETpad to begin the cycle.
Clean
This light isilluminated when a wash cycle iscomplete. The light will stag ON until the door isopened.
Flashing Display Lights
Lights What It Means What To Do
Thisis normal. Allow the dishwasher to drain and reset before you start a new
TheSTART/RESETpad wash cycle.
has been pressed.
Control Error
CLEAN
Pressthe START/RESETpad to turn off the beepeEIf the CLEAN
light continues to flash,callfor service.
PLUS A
BEEPING
SOUND
PLUS A
BEEPING
SOUND
Control Error
Pressthe START/RESETpad to turn off the beeper and the
dishwasherwill attempt to reset. Restartthe wash cgde.
If this error continues,turn off the power to the dishwasher at
the circuit breakerfor 30 seconds.Trgthe dishwasheragain.
If the error is still present,call for service.
8
Loading ...
Loading ...
Loading ...