Loading ...
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
GE Consumer & Industrial
General Electric Company
Louisville, Kentucky 40225
ge.com
Pub. No. 31-30563-1
DWG. NO. 206C1559P103
07K-2385 10/07
STEP 1–REMOVE DOOR PANEL
• Open dishwasher door.
• Remove the 6 Phillips head screws along the sides of the
door (see Figure 1) holding the inner door to the outer panel.
Retain screws, close door.
• Do not remove the 6 screws at the top of the door.
STEP 2–INSTALL THE ASSEMBLED PANEL
• Slide the panel assembly into the escutcheon slot (Figure 3).
• Reinstall the two original screws at the bottom of the door to
hold the assembly to the hinge arms (Figure 4).
• Open the dishwasher door and reinstall the original 6 Phillips
head screws to hold the inner door to the trim kit assembly
(Figure 5).
• Remove the two screws on the bottom of the door panel
(Figure 2). Allow door panel to slide down approximately 1/2".
Retain screws.
• Remove door panel.
Loosen 2 Screws
Escutcheon
Door
Panel
Bottom
Escutcheon
1/4 Hex Screws
DW Inst. 9
DW Inst. 10
Escutcheon
Escutcheon
Slot
DW Inst. 11
Figure 1
Figure 2
Loosen 2 Screws
Escutcheon
Door
Panel
Bottom
Escutcheon
1/4 Hex Screws
DW Inst. 9
Figure 3
Figure 5
Figure 4
DW Inst. 22
Do Not
Remov
e
Do Not
Remov
e
Do Not
Remov
e