Loading ...
Loading ...
Loading ...
Istruzioni per l’utente
58
Dishes not dry No rinse aid Add rinse aid
A program has been used that
does not involve a final drying
c
y
cle
See program table
Water in dishes or pans When loading the dishwasher,
make sure that you place
dishes and pans at an an
g
le
The dishes were taken out too
soon
Wait at least 20 minutes after
the end of the pro
g
ram
Use of ecological rinse aids Ecological products may be
less effective than traditional
products
Plastic dishes Plastic has a lower heat
storage capacity and is
therefore harder to dr
y
The combined detergent used
does not produce good drying
results
Use a different combined
detergent. Using traditional
rinse aids improves dr
y
in
g
.
Clouding of glassware Glass not dishwasher safe Only use glassware that is
dishwasher safe. Check the
water softener setting (reduce
if necessary). Use a detergent
that contains additives for
protectin
g
g
lass
Water marks on some items
or on plastic dishes
The formation of drops on the
plastic parts is inevitable;
stains may therefore be visible
after dr
y
in
g
Use a more intense program
Arrange dishes at an angle so
that the water can drain off
easil
y
Use a traditional rinse aid or
increase the dosa
g
e
Increase the water softener
settin
g
Removable streaks on
glasses, metal items and
cutlery
Too much rinse aid Reduce the amount of rinse
aid
No rinse aid or setting too low Add rinse aid or increase
suppl
y
Detergent not very effective Packets of detergent should
not be kept open for too long.
The detergent loses
effectiveness
Food residues on the dishes Dishes too close together,
baskets too full
There must always be enough
space between the dishes to
allow water jets to pass. Avoid
contact points
The spray arms do not rotate Take care not to prevent the
spray arms from rotating when
loadin
g
the dishwashe
r
Clogged spray arm nozzles Clean the spray arms as
indicated in the manual
Loading ...
Loading ...