Loading ...
Loading ...
Loading ...
Anytimeduringacycle,press
CANCEL/DRAINglows.Thedishwasherstartsa2-minutedrain(if
needed).Letthedishwasherdraincompletely.Thelightgoesoff
whenthedishwasherfinishesthedrain.
Tostopthedrain
YoucanpressCancel/Drainagaintostopthedrainimmediately.
Remembertodrainthedishwasherbeforestartinganewcycle.
Tocleartheindicators
PressCancel/Drainbeforestartingthedishwashertoclearall
optionsandcycles.
Duringthefirstminuteofacycle
1. Pressanewcycleand/oroptions.
2. Checkthedetergentdispensers.Theymustbefilledproperly
forthenewcycle.
After the first minute of a cycle
1. Press
CANCEL!DRAIN glows. Your dishwasher starts a 2-minute
drain (if needed). Let the dishwasher drain completely.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. Close the door.
4. Press a new cycle and/or options.
5. Press START.
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1. Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. Close the door firmly until it latches. The dishwasher resumes
the cycle after about a 5-second pause.
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off.
Select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
Press START to use the same cycle and option(s) as the previous
wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when
you press Start, the dishwasher runs the last full wash cycle and
options.
Hi Temp Scrub
Select this option to heat the water during parts of the cycle. Hi
Temp Scrub heats the water to 145°F (63°C) in the main wash.
Heating the water helps improve washing results. Hi Temp Scrub
is useful when loads contain baked-on food.
This option adds heat, water and wash time to the cycle.
1
NOTE: Hi Temp Scrub is an option with Pots Pans and Normal
Wash.
Sani Rinse
Select this option to raise the water temperature in the final rinse
to approximately 160°F (71°C) for 10 minutes. Sani Rinse adds
heat and time to the cycle. In the Pots & Pans and Normal Wash
cycles, this high-temperature rinse sanitizes your dishes and
glassware in accordance with the NSF Protocol P153 Sanitization ...................................................
and Cleaning Performance of Household Spray-Type
Dishwashers.
NOTE: Sani Rinse is an option with Pots Pans and Normal Wash
cycles.
Air Dry
Select this energy-saving option to dry without heat. Air drying is
useful when loads contain plastic dinnerware that may be
sensitive to high temperatures.
LOCKON
The dishes take longer to dry and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: Time Saver and Quick Rinse automatically use this
option. Air Dry is an option with all other cycles.
13
Loading ...
Loading ...
Loading ...