Loading ...
Loading ...
Loading ...
42 (800) 449-8691
Cooking Modes — Clean
Note: For documentaon purposes, touch screen control
illustraons are for the double oven. Instrucons apply to both
single and double ovens unless otherwise noted.
• Turn on the kitchen venlaon to remove any excess
smoke or fumes that might occur.
• Remove any large built-up food parcles and grease
before you start the Clean mode.
• Do not use water or other solvents to clean the baking
stone.
Important: Take out the temperature probe and oven racks
and wash the racks by hand. If the baking stone was pre dried,
you can leave it in the oven while the oven is cleaning.
1. Tap Clean on the Select Mode screen.
2. Tap Start on the Select Clean screen to start the cleaning
cycle, which will take an hour and a half.
3. The Cleaning in Progress mer will start counng down
from “1:30”. You can tap OFF at any me to stop the
process.
4. When the me is up, listen for a tone to indicate the Clean
cycle is complete. The oven will sll be hot at this point,
but you will be able to use it.
Loading ...
Loading ...
Loading ...