Loading ...
Loading ...
Loading ...
SPECIAL FUNCTIONS
CONTROLLOCK
Use this option to disable the controls. The
! _, washer can be locked during a cycle. This
ControlLockl feature allows you to prevent children from
t
changing cycles or operating the machine.
Once set, the CONTROL LOCK must be
turned OFF before the controls can be used. Once the
washer has shut off, the power button will allow the machine
to be turned ON, but the controls will still be locked. When
the controls are locked, "CL" will be displayed alternately
with the estimated time remaining.
Press and hold the CONTROL LOCK button for 5 seconds
to activate or deactivate the controls.
CLEAN WASHER
Cleon Washer A buildup of detergent residue can occur in
the wash tub over time and can lead to a
mildewy or musty smell. The CLEAN
WASHER cycle is specially designed to
remove this buildup using bleach or other
cleaner designed specifically for cleaning front load washers.
The CLEAN WASHER cycle should be run once a month, or
more often under heavy use conditions or if odor is present.
O Turn ON the washer and the STAIN TREAT
press
button. Selecting any other cycle after CLEAN WASHER
has been selected will cause the CLEAN WASHER
cycle to be cancelled.
O Fill the bleach the MAX line with
dispenser
to
liquid
chlorine bleach. Do not overfill the bleach dispenser.
Overfilling will cause the bleach to be dispensed
immediately.
O Press the to start the cycle.
START/PAUSE
O After the cycle has ended, the door and allow the
open
drum interior to dry completely.
NOTE: Do NOT use this cycle with clothes, and do NOT
add detergent or fabric softener.
* For powdered tub cleaners, add the cleaner to the main
wash compartment of the dispenser drawer. Place tablet
cleaners directly into the tub. Always follow the cleaner
manufacturers instructions and recommendations.
MY CYCLE
Select this option to store a customized
wash cycle for future use.
O Select a cycle.
O Press the desired options.
O Press the desired modifiers.
O To save the cycle press MY CYCLE for 3 seconds.
O Press the START/PAUSE.
O To reuse this cycle at another time, select MY CYCLE
and press the START/PAUSE
SMART SENSE
Smart Sense This feature uses a sensor in the tub to
_ check the hardness of the water and the
!
2ndRinSe_,_ detergent amount. Wash and rinse cycles
will be adjusted to optimize wash and rinse
performance. To use the SMART SENSE
feature press and hold 2 nd RINSE button for 3 seconds.
• Excessive detergent amount: rinsing cycle increase.
• Insufficient detergent amount: washing time increase.
• A small amount of remaining detergent detected: additional
rinsing will be added,
NOTE: 2°dRinse and Smart Sense cannot be selected
simultaneously.
DRUMLIGHT
The drum is equipped with a blue LED light
that illuminates when the washer is turned
ON. This light automatically turns OFF when
the door is closed and the cycle starts. To
turn ON the light during a cycle, press and
hold AUTO SOAK button for 3 seconds. The drum light will
illuminate and then turn OFF automatically after 4 minutes.
22
Loading ...
Loading ...
Loading ...