Loading ...
Loading ...
Loading ...
12
11
Similarly, position the lower chimney section and x the lower part to the frame using the 2 screws
removed previously.
10
Only For Ductless Installations
Ductless installations require a Ductless
Conversion Kit whose components
are pictured in FIGURE. Do not use the
DAMPER for ductless installations.
Insert the Connector extensions B into the
side of the Connector A.
Insert the Connector A into the Support
bracket C and x it with the screws.
Fasten the Support bracket C, xing it to the
upper part with the Screws.
Make sure that the Connector extensions
outlet B is in correspondence with the
Chimney openings both horizontally and
vertically.
Remove the cover from the eld wiring compartment.
Connect the Power Supply Cable to the rangehood.
Connect the Green (Green and Yellow) ground wire under the
wire connector. Attach the Black lead of the power supply
to the Black lead of the rangehood with a twist-on type wire
The UPPER CHIMNEY
COVER
, use the UPPER
CHIMNEY COVER supplied
attach the UPPER CHIMNEY
COVER.
Make sure to seal all joints with
The LOWER CHIMNEY
COVER
Install the LOWER CHIMNEY
COVER by sliding it up over
the support and the UPPER
CHIMNEY COVER.
For ductless installations, line up the DUCTLESS DIVERTER
EXTENSIONS HORIZONTAL
in the LOWER CHIMNEY COVER
B. Black wires
C. UL listed wire connectors
CHIMNEY COVER
, place the DUCTLESS
exhaust opening of the EASY
CUBE . Fit the DUCTLESS
DIVERTER EXTENSIONS
HORIZONTAL
FIGURE 12
Remove the cover from the eld wiring compartment.
Connect the Power Supply Cable to the rangehood.
Connect the Green (Green and Yellow) ground wire under the
wire connector. Attach the Black lead of the power supply
to the Black lead of the rangehood with a twist-on type wire
The UPPER CHIMNEY
COVER
, use the UPPER
CHIMNEY COVER supplied
attach the UPPER CHIMNEY
COVER.
Make sure to seal all joints with
The LOWER CHIMNEY
COVER
Install the LOWER CHIMNEY
COVER by sliding it up over
the support and the UPPER
CHIMNEY COVER.
For ductless installations, line up the DUCTLESS DIVERTER
EXTENSIONS HORIZONTAL
in the LOWER CHIMNEY COVER
B. Black wires
C. UL listed wire connectors
CHIMNEY COVER
, place the DUCTLESS
exhaust opening of the EASY
CUBE . Fit the DUCTLESS
DIVERTER EXTENSIONS
HORIZONTAL
Loading ...
Loading ...
Loading ...