STYLE#1
STYLE#2
STYLE#3
STYLE#3
STYLE #1
STYLE #2
Studs
Nipple
Hex Nut
“A”
“B”
Studs
Outlet
Box
Star
Washer
Ground
Wire
Mounting
Bracket
Stud
Or
Nipple
Cap
Nut
W-1
10/11
Fixture
INSTALLATION:
“B”
Outlet Box
Screws
(not included)
Outlet
Box
Fixture
Head
Thumb
Screws
STYLE#2
STYLE#1
STYLE#1
Glass
Spinner
Nut
Optional
Fixture
Socket
STYLE#5
Glass
Hole
For Stem
Ball Screw
STYLE #4A
STYLE #4B
Finial
Shade
Bulb
Tube
Bulb
STYLE #3
Glass
Allen
key
Screw
Socket
Holder
Knob
Fixture
Bracket
Screw
STYLE#2
TOOLS AND MATERIALS REQUIRED:
SAFETY PRECAUTIONS:
Blade
Screwdriver
Wire Cutters
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
4. CLEAN GLASS WITH WATER ONLY.
NOTE: Product May Not Look Exactly As Shown In Figures.
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
WALL FIXTURE
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) / 1-800-567-2513 (French) Monday through Friday 8:00 AM to 5:00 PM E.S.T.
White
Black
House supply
Ground wire
Fixture
Ground wire
1. Note: Refer to the mounting
bracket style that matches the
bracket that is included with your
fixture.
STYLE#1 (Non-Threaded holes)
Loosen hex nut “A” and “B”. Adjust
stud so it clears the fixture once
assembled. Hold in place with “A”
and lock in place with “B”.
STYLE#2 (Threaded holes)
Loosen “B”. Adjust stud to desired
length and lock in place with “B”.
STYLE#3 (Nipple)
Attach nipple to mounting bracket
and adjust until it will clear fixture
when assembled. Lock in place
using the hex nut.
2. Attach ground wire on
mounting bracket assembly to
outlet box ground screw. Mount the
mounting bracket to outlet box
using outlet box screws
(not included)
.
Make sure the studs or nipple on the
mounting bracket are facing out
from the outlet box.
3. Connect the ground wires (bare
copper or green) from your fixture
to the ground wire (bare copper or
green) or ground screw in the
electrical outlet box. Connect black
wire from fixture to black wire in
outlet box and connect the white
wire from fixture to white wire in
outlet box.
4. Once connections of wires are
completed, carefully tuck wires
and wire nuts into the outlet box
making sure no bare wire (on the
black and white) is visible at the
wire nuts.
STYLE#1- Tuck electrical wires into
outlet box and position fixture over
studs or nipple on mounting bracket
assembly. Secure fixture in place
with star washer(s) and cap nut(s).
Note: If required, assemble body and
spread the arms of the fixture out
evenly.
Style #2 - Insert one screw into the
mounting bracket - do not tighten
yet. Tuck electrical wires into outlet
box and position fixture over the
mounting bracket. Line up the
screw in the bracket to to the "7"
hole on the fixture. Slide fixture to
secure in place. Insert remaining
screw. Tighten both screws to
secure.
5. Note: Refer to the style of
assembly that matches the style of
your fixture.
STYLE#1 - Remove spinner nut
from socket. Position glass on the
fixture and secure with spinner nut.
Install proper bulb type and
wattage.
STYLE#2 - If required, place the
decorative ring over the glass
shade. Attach the glass shade to the
fixture socket using the thumb
screws (tighten with fingers only).
Install proper bulb type and
wattage.
STYLE#3 - Install proper bulb type
and wattage. Place the glass on the
socket. Tighten the screw using the
Allen key (provided). Do not
over-tighten the screw. Keep the
Allen key for future use.
If your fixture has shades,
STYLE#4A - Place shade on tube,
then install bulb.
STYLE#4B - Install bulb, shade then
finial.
STYLE#5 - Install proper bulb
type and wattage before
assembling the glass. Remove ball
screw from the curved stem.
Position glass on lamp with the
curved stem being inserted
through the hole in the glass. Hand
tighten the ball screw to secure the
glass in place.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
