Loading ...
Loading ...
Loading ...
20
|
REMOVE
Gas Requirements
To perform the following operation is necessary to have eavy
access to the back the range. While performing this plese note
that the range must not be connected to the power and or gas
lines.
1 - Remove the main back cover unscrewing the two screws.
2 - Remove the gas regulator back cover unscrewing the single
screw.
3 - Fit the elbow on the regulator. Put the gasket, in it.
4 - Connect the regulator to the manifold and re-install the main
back cover.
5 - Re-install the gas regulator backcover and x it with two
screws.
Loading ...
Loading ...
Loading ...