Outdoor GreatRoom INTEZ

User Manual - Page 12

For INTEZ.

PDF File Manual, 16 pages, Read Online | Download pdf file

INTEZ photo
Loading ...
Loading ...
Loading ...
12
A. This appliance must be lit electronically. When
lighting, follow these instructions exactly.
B. Before lighting, smell all around the appliance area
for gas. Be sure to smell next to the base of the
appliance because some gas is heavier than air and
will settle on the floor.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electric switch, do not use any
phone nearby.
Immediately call your gas supplier from a neighbor’s
phone. Follow gas supplier’s instructions.
If you cannot reach your gas supplier, call the fire
department
FOR YOUR SAFETY, READ BEFORE LIGHTING
WARNING!
If you do not follow these instructions exactly, a fire or explosion may result
causing property damage, personal injury, and/or loss of life.
C. Do not use the appliance if any part has been
underwater. Immediately call a qualified service
technician to inspect the appliance and replace any
part which has been underwater.
D. The gas pressure regulator provided with this
appliance must be used. This regulator is set for an
outlet pressure of 10.5 inches water column.
Lighting Instructions
1. STOP! Read the safety information above.
2. Locate two-position switch and set to ON
position (I)
3. Burner should begin sparking.
During first use, it may take longer than
usual for flame to ignite due to air being
present in gas line. This is normal.
If sparking stops before flame ignites, turn
the unit to the OFF position (O) and consult
troubleshooting section of this manual (P.15)
4. To extinguish, put switch in OFF position.
Electronic Ignition
NOTE:
This device contains an intelligent flame recognition system
which will produce a spark until the presence of a flame is
detected. Ensure that burner area and sensing/igniting
electrodes are kept clear for proper operation. The burner
will go into safety shut-off mode in excessive wind or rain.
This mode requires the unit to be reset before it will operate
again. To reset, simply switch the unit off and then back on
again to resume operation.
5 Operating your Intrigue
Loading ...
Loading ...
Loading ...