Loading ...
Loading ...
Loading ...
Automatic Ice and
Water Dispenser
Dispenser Selector
J
Pressglassagainst dispensing arm.
Wire
Signal Arm
Ice Maker
Theiceand water dispenser on the freezer door conveniently dispenseschilled water,
and either ice cubes or crushed ice, depending on the model.
To operate the dispenser, slide the knob to the selection of your choice and press
a glassagainst the dispensing arm, asshown. Besure to hold the glassasfar up as
possible to catch all ice. To stop dispensing, pull glass away from dispensing arm.
When dispensing ice, releasethe dispensing arm before the glass isfull, but do not
remove the glass until the ice has completely dispensed.
Asmall heated area beneath the dispenser floor catches and evaporates small spills.
This drip tray isremovable and dishwasher safe. Do not pour water or excess
cubes into this area because there is no drain.
Light
The dispenser has a light which carl be turned on and off by sliding the knob to the
desired position. The light also turns on automatically when ice and/or water is
dispensed. Replace light bulb with an appliance bulb of the same wattage.
How the Water Dispenser Works
The water tank islocated behind the drawers in the refrigerator compartment. As
the water isdispensed, the tank isautomatically refilled. Forproper operation of the
dispenser, the supply water pressure must fall between 30 psi and 120 psi.
After the refrigerator is installed and the plumbing connections are complete, the
water tank should be filled by drawing one glass of water. It may take
about 1-1/2 minutes after depressing the dispenser arm before water works its
way through the plumbing connections and begins to fill this first glass. Draw and
discard 7 more glassesto be surethat the tank and plumbing connections are rinsed
of any impurities. The water delivery system has a built in shut off device that will
stop the water flow after 3 minutes of continuous use.Simply releasethe actuator
button to reset the dispensing mechanism.
To ensure fresh-tasting water, plan to usethe dispenser every day. If the water
dispenser has not been used for a week or more, draw and discard 7-8 glassesto
freshen the tank supply.
How the Ice Dispenser Works
The ice maker and ice storage bin are located in the top left corner of the freezer
compartment. After the refrigerator isinstalled properly and hascooled for several
hours, the ice maker can begin making ice. To begin iceproduction, lower the wire
signal arm to the "down" or ON position. As cubes are made, they are stored in the
storage bin. With no usage itwill take approximately 2 daysto fill the bin. However,
the dispenser may be used after the first batch of ice ismade. The ice maker turns
off automatically when the ice storage bin is full.
Because of new plumbing connections, the first production of ice cubes may be
discolored or have an odd flavor. Theseshould be discarded until the cubes made
are free of discoloration and taste. _ Remember that water quality
determines your icequality. It isbest to connect the ice maker to water that isnot
softened. Chemicals from a malfunctioning softener can damage the ice maker.
If ice maker is connected to soft water, ensure the softener is maintained and
working properly.
To stop the ice maker, lift the wire signal arm until it clicks and locks in the "up"
or OFFposition.
Loading ...
Loading ...
Loading ...