Waterdrop WD-M5-G Instruction Manual

Loading ...

1.Shut off the water supply. Turn on the kitchen faucet to release the water pressure;

NOTE: Make sure the water has stopped before proceeding to the next step. Get a

towel or bucket to catch any excess water.

2. Disconnect the cold water pipe from the cold water supply valve;

3. Connect the white 1/4” inlet water tubing to the feed water adapter and tightened the nut.

NOTE: For convenient connecting, it’s recommended to immerse one end of the inlet tube

in warm water for a while, then connect it to the feed water adapter.

4.Twist the feed water adapter onto the cold water supply valve (with its washer)

and tighten it with an adjustable wrench (Figure 4);

NOTE: If the cold water pipe is 1/2”, unscrew the two converters from the feed

water adapter (Figure 5), and then implement step 3.

5.Twist the cold water pipe (with its washer) onto the feed water adapter and tighten

with an adjustable wrench.

TouTube

Loading ...

Waterdrop WD-M5-G Countertop Reverse Osmosis Water Filter