Loading ...
Loading ...
Loading ...
Page 18
6. Cleaning and maintenance
TYPE 1 (GLED Square):
REPLACING THE LED BULB
The life span of an LED bulb is at least 10 times that of a halogen bulb. If the
globe needs to be replaced, proceed as follows:
1. Unplug the respective connector (A).
2. Press the tabs (B) inside the rangehood.
3. Remove the LED.
4. Put in the new LED and reinstall, as above, but in reverse order.
A
B
Your rangehood may have multiple light types, please refer to the pictures below for light replacement.
Type 1 – GLED Square
DANGER
Always switch o and disconnect power before replacing the lights. Failure to do so may
cause serious injury. Please be aware that the light bulb may retain heat for a short period
of time after being switched o.
Halogen Bulb
LED Bulb [Optional]
1
2
3
TYPE 3 (Halogen G4HD, LED G4):
REPLACING THE HALOGEN OR LED
BULB MAX 20W, 12V
1. Press on the indicated zone “push” (1)
2. Open the light cover to an angle of 90º, DO NOT force past 90º.
3. Insert a new 12V halogen bulb as indicated (2) and (3), 50W
maximum.
4. Close the light cover by pressing the part where it says “push”
(1), until it clicks shut.
NOTE: Never handle the glass of the lamp with bare hands. Use
a cloth or wear gloves when handling the bulb to avoid contact
with skin.
Type 3 – Halogen G4 HD, LED G4
Replacing the Lights
Loading ...
Loading ...
Loading ...