Loading ...
Accucold Division · Felix Storch, Inc. · www.accucold.com · 1-888-4-MEDLAB · info@accucold.com
Using the Combination Lock
The default combination is set at 0-0-0-0. To reset the combination, follow these steps:
Resetting the combination
1. Make sure the digital wheels are set at the correct code so that the
housing turns freely. The cam should be engaged so that the door
of the locker cannot open.
2. Use a screwdriver or other tool to push and hold the reset button.
(Fig. 1) Enter a new combination code using the four numbered
wheels on the front of the lock.
3. Release the reset button.
4. Make sure the housing is able to turn freely at the new setting.
The new code is now set.
Locking
While the lock is in the unlocked position (i.e. the housing can be
turned by hand), set the numbered wheels to any random numbers
to lock. (Fig. 2)
Unlocking
Turn the numbered wheels to the correct code for the particular locker.
Using a Key to Unlock
Use a key to open the locker, if the combination is forgotten.
1) Insert the key into the barrel on the front of the lock.
2) Turn the key 90 degrees to unlock. If the key is used to unlock, the
cam will turn, but the numbered wheels will not rotate.
NOTE: The key for the outer door does not match the key used for the interior locking
compartment.