Loading ...
Loading ...
Loading ...
7
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss.
Press the Cancel keypad to clear. When the oven is not in use, the
time of day is displayed. If the range is in Energy Save mode, the
display will be blank when not in use.
Tones
Tones are audible signals, indicating the following:
One Tone
■ Valid keypad press
■ Oven is preheated (long tone)
■ Function has been entered
■ Reminder, repeating each minute after the end-of-cycle tones
Three Tones
■ Invalid keypad press
Four Tones
■ End of cycle
Use Settings to change the tone settings.
Energy Save
The Energy Save mode puts the range into Sleep mode and
reduces energy consumption.
To Activate the Energy Save Mode:
1. Press SETTINGS until “Energy saver on.” appears on the
display.
2. Press 1 to enable.
To Deactivate the Energy Save Mode:
1. Press SETTINGS until “Energy saver off.” appears on the
display.
2. Press 1 to disable.
Clock
The Clock can use a 12- or 24-hour cycle.
1. Press the Clock keypad.
2. Press 1 for automatic setup or 2 for manual setup.
3. Press 3 for AM or 6 for PM.
4. Use the number keypad to set the time of day.
5. Press the Start keypad to save the setting.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Settings
keypad.
Use Settings to scroll through the features that can be changed.
Each press of the Settings will advance the display to the next
setting. After selecting the feature to be changed, the control
will prompt you for the required input. Press the Start or Cancel
keypads to exit and display the time of day. Details of all of the
feature changes are explained in the following sections.
Press the Cancel keypad to exit Settings.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed
to Celsius.
1. Press SETTINGS until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press 1 to adjust the setting.
4. Press the Start or Cancel keypads to exit and display the time
of day.
Audible Tones Disable
Turns off all tones, including the end-of-cycle tone and keypress
tones. Reminder tones are still active when all tones are disabled.
1. Press SETTINGS until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press 1 to adjust the setting.
4. Press the Start or Cancel keypads to exit and display the time
of day.
Sound Volume
Sets the volume of the tone to either high or low.
1. Press SETTINGS until “SOUND VOLUME” is displayed.
2. The current setting will be displayed.
3. Press 1 to adjust the setting.
4. Press the Start or Cancel keypads to exit and display the time
of day.
Keypad Feature Instructions
RAPID
PREHEAT
Rapid oven
preheating
Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to off,
but it can be changed to on.
1. Press RAPID PREHEAT.
2. The current setting will be displayed.
3. Press 1 to adjust the setting.
4. Press the Start or Cancel keypad to exit and display the time of day.
IMPORTANT: This feature should only be used for one-rack baking. Unused racks should
be removed prior to Rapid Preheat. A standard rack should be used for Rapid Preheat.
If preheating for the Bake cycle has already started, Rapid Preheat may be started directly
by pressing RAPID PREHEAT.
AQUALIFT
SELF CLEAN
Clean cycle
See the “Clean Cycle” section.
REMOTE
ENABLE
Enable remote app
control
Press REMOTE ENABLE to enable the ability to utilize the Whirlpool
®
app.
CONNECT Connect to Wi-Fi
Press and hold CONNECT while your router’s WPS indicator light is blinking to connect
your range to your Wi-Fi network. See the “Connectivity Setup” section for more detailed
instructions.
Loading ...
Loading ...
Loading ...