Loading ...
Loading ...
3
Installation - continued
2. Fix mounting screws and cup washers to the wall using the dimensions given below. Mounting to a stud is recommended.
However, if fitted to other wall linings (plasterboard, concrete etc) suitable wall fixings will be required.
A Distance from the bench top to the lower fixing screw
100mm flush fit between the bottom surface of the splash back and the bench top
103mm allows a 3mm gap between the splash back and bench top if sealing is required
3. Hang splash back from the cup washers.
Cleaning and maintenance
Powder coated surfaces must not be cleaned with abrasive or chemical cleaners. To keep the splash back looking
its best, wipe regularly with a damp soft cloth. A mild soap and water solution may be used to remove stubborn
dirt. Under no circumstances should harsh detergents (including chemical cleaners) such as bleaches, scourers or
any abrasive cleaner be used as these products may irreparably damage the surface finishes of the splash back.
NB. Their use will render the warranty void.
For any other problems please call help line on NZ 0800 760 667 or AUS 1800 648 556
Loading ...
Loading ...