Loading ...
Loading ...
Loading ...
Surface Cooking (cont'd)
Using TurboBoii TM (some models)
The TurboBoiF Mfeature uses a higher wattage surface radiant element which
can bring food items to boil much quicker. The left front radiant element will be
clearly marked if this feature is available on your range (See Fig. 1). If equipped
with the TurboBoil TM feature, place the cookware to boil on the left front surface
element and follow the instructions "To Operate a Single Radiant Element" in
the Settings Surface Controls section.
Oven Control Functions
f I _ _ B 0 8 0 I L
Fig. 1
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use ofyouroven, become familiar with
the various pad functions of the oven as described below.
CLOCK SET
PAD-- Used
to set the
time of day.
OVEN INTERIOR
LIGHT PAD-- Used to
turn oven interior light
ON or OFF. This pad is
also used to activate
Cooktop Lockout ,_ ..................\
the
feature (some models) ,:: 0_:
SELECT SELF-CLEAN
® ®
PAD-- Used to select
the Self-Cleaning
cycle. A 2, 3 or 4 hour
Self-Clean time may be
selected.
COOK TIME UP and DOWN ARROW PADS-- Used along BAKE PAD--Used
PAD-- Used to with the function pads to select oven to select the bake
enter the length of temperature, cook time, start time (when function.
the baking time. programming an automatic start time), time of
day, clean time and minute timer.
FEATURE I NDICATOR
LIGHTS-- These light to
show which feature is in
use.
BROIL PAD-- Used to
select the variable broil
function.
WARM & HOLD PAD--
Used to set the Warm &
Hold feature.
AirGuard TM & indicator
light -- Use after preheat
to help freshen kitchen
air during cooking.
TIMER SET/OFF PAD-- DELAY START
Used to set or cancel the PAD-- Used to set
minute timer. The minute the desired start
timer does not start or stop time for baking &
cooking. Also, Self-Clean. May be
TIMER SET/OFF pad is used with COOK
used to set the Continuous TIME to program a
Bake feature, delayed bake cycle.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* --The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated. The indicator light
will glow constantly after the door locks. COOKTOP LOCKED light
will glow when the cooktop has been locked (some models).
STOP/CLEAR PAD--
Used to clear any
function previously
entered except the time
of day and minute timer.
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR pad is
used to activate oven
door lockout setting.
*Note: The OVEN indicator light onthe electronic display
will turn ON and QFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is
cycling to maintain the selected baking temperature. When
the preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold _. After 7 seconds,
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold _,_ again for 7 seconds until the control beeps
once.
Temperature conversion
The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C
to 287°C).
To change the temperature to °C (Celsius) or from °C to
°F (control should not be in a Bake or Clean mode):
1. Press B,o, .... appears in the display.
2. Press and hold the A until "HI" appears in the
display.
oc
3. Press and hold B,o,until °F or appears in the display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
12
Loading ...
Loading ...
Loading ...