Loading ...
Loading ...
Loading ...
o
Audio signals that can be played back
See “D/A converter” (v p. 51).
NOTE
0
Perform operations such as playback and pause on the computer. At this time, you
cannot perform operations with buttons on this unit or the remote control.
0
When this unit is functioning as a D/A converter, sound is not output from the
computer’s speakers.
0
If the computer is disconnected from this unit while the computer music playback
software is running, the playback software may freeze. Always exit the playback
software before disconnecting the computer.
0
When an error occurs on the computer, disconnect the USB cable and restart the
computer.
0
The sampling frequency of the music playback software and sampling frequency
displayed on this unit may differ.
0
Use a cable that is 10 ft (3 m) or less to connect to the computer.
Connecting and playing back from a
digital device (Coaxial/Optical)
1
Connect digital device to this unit. (v p. 23)
2
Press the input source select button (COAXIAL or
OPTICAL 1/2) to switch the input source to “COAXIAL”
or “OPTICAL 1/2”.
The digital audio signal that is being input is shown as follows in the
display.
“COAX:PCM
or
“OPT1:PCM
or
“OPT2:PCM
xxxxkHz” xxxxkHz” xxxxkHz”
(xxxx is the sampling frequency.)
0
If the sampling frequency cannot be detected, “Unlocked” will be
displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
Contents
Connections Playback Settings Tips Appendix
40
Front panel Rear panel
Remote control
unit
Index
Loading ...
Loading ...
Loading ...