Loading ...
Loading ...
Loading ...
Before You Caii
TROUBLESHOO_NG
GUIDE
PROBLEM
Before calling for service, review this list. It may save you time and
expense. This list includes common occurrences that are not the
result of defective workmanship or materials in this appliance.
CAUSE CORRECTION
APPLIANCE OPERATION
Appliance does not run.
Appliance runs too much
or too long.
• Appliance is plugged into
a circuit that has a ground
fault interrupt.
• Temperature control is in
the "OFF" position.
• Appliance may not be
plugged in, or plug may
be loose.
• Fuse blown or tripped
circuit breaker.
• Power outage.
• Room or outside weather
is hot.
• Appliance has recently
been disconnected for a
period of time.
• Large amount of warm
or hot food have been
stored recently.
• Door is opened too
frequently or kept open
too long.
• Appliance door may be
slightly ajar.
• Temperature control is set
too low.
Appliance gaskets are
dirty, worn, cracked or
poorly fitted.
o
o
Use another circuit. If you are
unsure about the outlet, have it
checked by a certified technician.
See Thermostat Setting.
Ensure plug is tightly pushed
into outlet.
• Check/replace fuse with a 15-amp
time delay fuse. Rest circuit breaker.
• Check house lights. Call local
electric company.
• It's normal for the appliance to work
harder under these conditions.
• It takes 24 hours for the appliance
to cool down completely.
o
o
Warm food will cause appliance
to run more until the desired
temperature is reached.
Warm air entering the appliance
causes it to run more. Open the
door less often.
See "Door Problems':
Turn control knob to a warmer
setting. Allow several hours for the
temperature to stabilize.
Clean or change gasket. Leaks in
the lid seal will cause appliance
to run longer in order to maintain
desired temperature.
Interior appliance • Temperature control is set • Turn control knob to a warmer
temperature is too cold. too low. setting. Allow several hours for the
temperature to stabilize.
Interior appliance • Temperature control is set •
temperature is too warm. too warm.
Appliance external surface
temperature is warm.
Door is open too frequently
or kept open too long.
• Large amount of warm or
hot food have been stored
recently.
• Appliance has recently
been disconnected for a
period of time.
The external appliance
walls can be as much
as 30°F warmer than
room temperature.
Turn control knob to a colder
setting. Allow several hours for the
temperature to stabilize.
• Warm air entering the appliance
causes it to run more. Open the
door less often.
• Wait until the appliance has had
a chance to reach its selected
temperature.
• Appliance requires 24 hours to cool
down completely.
This is normal while the
compressor works to transfer heat
from inside the appliance cabinet.
9
Loading ...
Loading ...
Loading ...