Loading ...
Loading ...
Loading ...
13
INSTALLATION INSTRUCTIONS
4
Locate the twoholes on the rear of
the refrigerator (refer to C). Screw
in the M6 cap screws until all the
thread is gone.
5
Move the refrigerator back towards
the wall until the screw hits the back
of the bracket (refer to D).
Note: If you want your refrigerator
to sit further forward, unscrew up
to 10mm of the M6cap screw. Be
careful that the screw does not miss
the bracket and contact the wall.
IMPORTANT!
When fastening with masonry plugs and/or screws:
Ensure the screws avoid electrical, gas and water conduits.
Ensure the surface of the bracket is fastened to withstand a 100kg load.
Ensure light-weight masonry material such as cinder block and new concrete (no
curing time) are not used in installation.
Do not use metallic materials that may corrode, stain and/or damage the enclosure.
Installing your water filter (Ice & Water and Automatic Ice models)
1
Open your refrigerator and locate the
filter cover on the back wall, top right
of your refrigerator. Pull the tab at the
bottom of the cover towards you to
release (refer to A).
– The cover will slide down
uponrelease.
Note: We recommend removing the
top shelf if you need more space while
installing the filter.
2
Remove the plastic wrapping of the
newfilter.
3
Insert the filter into the filter head
(referto B).
4
Push the filter firmly all the way into the
filter head then turn the filter clockwise
until it locks into place (refer to C).
– If the filter will not turn, ensure that
the filter is pushed firmly into the
filter head.
5
Push the entire filter back into the bracket
(refer to D).
6
Push the cover up and into the slots at the
top of the filter housing until it clicks and
the base locks firmly into place (refer to E).
C
45–60mm
D
B
C
D
E
A
Loading ...
Loading ...
Loading ...