Loading ...
Loading ...
Loading ...
b. If the walking belt has shifted to the dght, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench,
turn the left rear rolleradjustment boltcounterclockwise 1/4 of a
turn. Plug in the power cord, Insert the key and run the treadmill
for a few minutes. Repeat until the walking belt is centered.
6. SYMPTOM: THE TREADMILL SITS UNEVENLY ON THE FLOOR
a. Make sure that the sixbase pads are attached to the treadmill. See assembly steps 4 and 5 on page 6.
7. SYMPTOM: THE INCUNE SYSTEM STICKS
a. Raise the treadmill to the storage position. See HOW TO FOLD THE TREADMILL FOR STORAGE on page
t0. Pivot the incline leg several times to break in the incline system.
13
Loading ...
Loading ...
Loading ...