SIRIUS “EASYEAVE 150/200” installation guide.
Sirius ducting kits are a high quality and simple, complete solution in a box. They provide an
ideal ventilation path to efficiently exhaust your kitchen fumes, steam, heat and odours –
filtered through your rangehood to the outside atmosphere.
Please check that there is a clear path for your ducting to run prior to installation, making sure
to look out for TV, computer, telephone and electrical cables, water and gas pipes, insulation
mater
ials and air conditioning pipes and duct, before cutting holes.
For new homes, ideally fit the basic ducting (pipe) components at the frame up stage.
Additional lengths of ducting, joins, galvanised steel angled elbows and all other ducting
accessories are available from your local retailer where you purchased your SIRIUS EasyKIT.
For further advice please call our ducting consultation service on Ph: 1300 762 219 (A
ustralia
only) or visit www.siriusbrand.com
and fill in the fields and one of our trained consultants will
assist you in the best manner possible.
Fig.1.
Installation Guide
:
(Disclaimer) The following instructions are provided as a guide only and in no way constitute or replace your local council requirements or Australian and New Zealand Standards and Building Codes.
Please Note: As shown in Fig.1. – the ducting used is 150mm Ø and dimensions to the point of convergence are based on a 45⁰ roof pitch…
• Semi-Rigid duct can bend reasonably sharply without impeding air-flow and as shown in Fig.1. and from the centre of the vent, to the point of
convergence is 250mm.
Professional Ducting Range
Eave Vent
Rangehood
Ducting
Loading ...
