Loading ...
Loading ...
Loading ...
B,
,
Attach rope guide (A) through handlewith plastic knob
(B). Tighten by hand. Routeengine recoil rope through
guide.
Align hose wrap (C) to the back side of accessory tray.
Locate notch with "unlock" icon (D) on hose wrap.
Position notch at top with hose wrap in vertical position.
Clips in the back of accessory tray should slide into the
grooves on the inside surface of hose wrap. Slide hose
wrap on back of accessory tray and rotate 1/8 turn until
"locked"icon (E) is in vertical position. Hose wrap is
easily removed from the accessorytray for wrapping and
unwrapping of the high pressure hose. A clip to secure
the hose on the reel makes it easy to wrap the hose
while it is detached from the accessory tray.
/
,
Attach bottle bracket (F) to handle with carriage bolt (G)
and black plastic knob (H). Tighten by hand.
2-1N-1 SIPHOHSYSTEM
The pressure washer is equipped with two detergent
siphoning hoses.
Standard Clear Siphon Tube
Cleartube with filter:
Whenusingtheclearsiphontube,dilute
1part concentrateto 16 partswater
(4 ozof standardconcentratemakes
1/2gaflonof mix.)
Project Pro PerfectMiW_ Siphon
Bluetube with blue bottle cap:
Whenusingtheblue PerfectMixTM siphon,
usetheconcentratestraightfrom the bottle
(Onequartbottleof PerfectMixTM concentrate
makes4.25gaflonsof soapspray.)
Attach Project Pro®PerfectMix" Siphonto Pump
Attach the hose end of the blue Project Pro®PerfectMixTM
Siphon (J) to the barbed hose fitting (K) on the pump.
Attach PerfectMix,. Detergent Siphon
to Concentrate BottJe
Place Project Pro® PerfectMixTM bottle (not included) in the
wire-form bracket on the handle. Removecap from bottle
and insert the Project Pro®PerfectMixTM Siphon (M). Screw
the siphon unit to the top of the bottle (N). Usethe clip on
the cap (M) to snap siphon to wire form bracket when siphon
is not in a concentrate bottle.
Add EngineOil
1. Placepressure washer on a flat, level surface.
2. Cleanarea around oil fill and removeyellow oil fill
cap/dipstick.
3. Using oil funnel (optional), slowly pour contents of
provided oil bottle into oil fill opening.
NOTICE
Improper treatment of pressure washer can damage it and
shorten its life.
DONOTattemptto crankor startthe enginebeforeit hasbeen
properlyservicedwiththe recommendedoil. Thismayresult in
anenginefailure.
4. Replaceoil fill cap/dipstick and fully tighten.
Add Fuel
Fuel must meet these requirements:
• Clean,fresh, unleaded gasoline.
• A minimum of 87 octane/B7AKI (91 RON). High altitude
use, see High Altitude.
Loading ...
Loading ...
Loading ...