Loading ...
Loading ...
3
3. The button in the middle of the rear view mirror is the POWER button.
a) When reverse is engaged or when in camera mode press the POWER button to adjust
the back-light of the monitor.
b) When the monitor is in video mode, the POWER button is used to turn the monitor on
and off.
PRECAUTIONS FOR USE OF MIRROR MONITOR
1. The Mirror monitor is made of glass. Do not subject it to a mechanical shock by dropping it
from a high place, etc.
2. Do not apply excessive force to the monitor surface or to the adjoining areas as this may
cause the colour tone to vary.
3. Do not attempt to disassemble the mirror monitor. Doing so will void all warranties.
4. When cleaning the mirror monitor, spray glass cleaner directly onto a paper towel or similar
material. Do not spray glass cleaner directly onto the mirror monitor as this can result in
damage to circuitry. Clean residue with a soft dry cloth.
SAFETY
1. A rear view camera display is only a visual assistance device when reversing the vehicle.
Images displayed on the screen may be different from actual conditions. Always physically
inspect conditions and drive carefully.
2. Reverse your vehicle as slow as possible. High speeds can limit your reaction time to stop
your vehicle.
3. The displayable range of input devices including cameras can vary depending on vehicle
loads and road conditions.
4. Do not use a rear view camera system with the tailgate open.
5. Objects under or around the bumper cannot be displayed when the system is used with a
rear view camera.
SPECIFICATIONS
Screen Size
4.3”
Display Screen
TFT-LCD
Display Resolution
400(h) x 234(v)
Aspect Ratio
16:9
Power consumption
8W
Working Voltage
DC 12V
Video Input
Video-In (e.g. GPS / DVD (default) + Reverse Camera-In
Signal System
PAL / Auto / NSTC
Loading ...