Loading ...
Loading ...
Loading ...
7
Reversing the Door Swing
If you find the direction of opening the door of the refrigerator or freezer inconvenient, you can
change it. Holes on the opposite side have already been prepared at the factory. To reverse your
door, follow these instructions:
1. Take the upper hinge cover from the door and remove
the screws that hold the top hinge
2. Lift the hinge straight up to free the hinge pin from the
socket in the top of the door
3. Lift the door up and away to free its bottom socket from
the hinge pin
4. Remove the screws to the bottom hinge
5. Remove the decorative caps from the opposite side and
plug the holes from the original side with the decorative
caps
6. Move the bottom hinge to the opposite side and tighten
the screws. Use any lock washers or nuts if they were used in the original installation
7. Replace door onto the hinge pin on the bottom hinge. Place top hinge pin into door. Insert
screws into the top hinge.
Installing the Handle
This refrigerator or freezer includes a handle that is not required to operate the unit. To install the
handle, follow the instructions below:
1. Use a screwdriver to remove the screws on the side of door where the handle is to be installed.
2. Align the handle with the screws removed in step # 1. Tighten the screws using a Phillips head
screwdriver until the handle is both flush and secured tightly against the door side. (DO NOT
over-tighten as this will cause damage to the door surface.)
Loading ...
Loading ...
Loading ...