Loading ...
Loading ...
Loading ...
EN - 3
MANUAL SETTING
In normal display mode, press and hold the "SET/°F/°C" button for
a few seconds to enter the time settings. The digit being set will start
fl ashing. Enter the settings by pressing the "MIN/MAX/+" button.
The setting sequence is: 12/24 hour format hours minutes.
Confi rm the settings by pressing the "SET" button.
If you do not perform any operation within 20 seconds, the normal
time display mode will automatically be renewed.
TEMPERATURE
The indoor temperature is automatically measured within
3–8 minutes of being turned on. Press the "SET/°F/°C" button to
switch between °C/°F.
Press the "MIN/MAX/+" button to show the min/max temperature
record for the indoor and outdoor temperatures. This fi gures is
always erased at 0:00 p.m.
MANUALLY INITIATING SIGNAL
RECEPTION FROM THE SENSOR
Press the "MIN/MAX/+" button for a few seconds to register a new
outdoor temperature. The antenna will start fl ashing. After the
temperature is registered, the antenna will stop fl ashing.
INSTALLATION LOCATION OF THE
SENSOR AND THE MAIN UNIT
• Install the outdoor sensor so that it is facing the main unit
(receiver) with no obstacles in the signal path, e.g. doors,
walls and furniture. Prior to permanently installing the outdoor
sensor, fi rst test the range. Every building obstacle reduces the
transmission range. The transmission may also be affected by
heavy snow, rain or fog.
Loading ...
Loading ...
Loading ...