Loading ...
Loading ...
Loading ...
14
3
2
4
ON
DIM
ON
DIM
CR2032 3V
ON
DIM
CR2032 3V
NOTE: Each transmitter of this remote control carries a
unique ID code to facilitate communication between
paired devices. The ID code is set by factory and is not
user changeable. However, you will be required to
perform an “ID code learning ” process manually under
these circumstances:
•When your remote control is not responding(make sure
• If you have multiple fans installed within a close
proximity and want to control all fans using a same
remote transmitter.
NOTE: Each fan requires its own receiver.
NOTE:
battery is not flat)
•After you have replaced a faulty transmitter or receiver
with a new one.
Otherwise the remote control will not work. To perform
this process manually, follow steps below:
After installing and wiring the unit, restore power to your
fan, press and hold the transmitter “ ” button for 5
seconds until the fan beeps to indicate the code learning
process have been completed. This operation must be
completed within 1 minute after restore power to the fan.
Loading ...
Loading ...
Loading ...