Loading ...
Loading ...
Loading ...
27 28
Using the Oven
Using Pans Correctly
1. Always ensure that the bottom and handles of pans do not protrude over the
worktop.
2. When cooking with flammable fat, such as oil, do not leave the range unattended.
3. Use pots of the appropriate size on each burner following the indication of the
diagram below.
4. To avoid overflow when boiling liquids; turn knob to the minimum heat.
5. Always use pots with matching lids.
6. Dry the bottoms of pans before operation.
7. Wok Cooking: Always use the wok adapter supplied with the range. The wok
pan’s external diameter shall not be smaller than 10” and larger than 16”.
Oven Cooking
1. Use care when opening door. Let hot air or steam escape before removing or
placing food.
2. DO NOT heat unopened food containers. Pressure build-up may cause container
to burst and result in injury.
3. Keep oven vent ducts unobstructed.
Placement of Oven Racks
1. Always place oven racks in desired location while oven is cool. If rack must be
moved while oven is hot, DO NOT let potholder make contact with heating element
in oven.
2. DO NOT CLEAN DOOR GASKETS. The door gasket is essential for a good seal.
Care should be taken not to rub, damage, or move the gasket.
3. DO NOT USE ABRASIVE OVEN CLEANERS. No commercial oven cleaner or
oven liner protective coating of and kind should be used in or around any part of the
oven.
Clean only the parts listed in the manual, before cleaning the oven, remove broiler
pan and other utensils.
4. In case of electric power failure reset oven/broiler controls to the OFF position, do
not attempt to use oven/ broiler until the power has been restored.
Using the Oven
Placement of Oven Racks Continued
5. DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACE OF OVEN.
Heating elements may be hot even though they are dark in color. Interior surfaces of
an oven become hot enough to cause burns. During and after use, do not touch, or
let clothing or other flammable materials come into contact with the heating elements
or interior surfaces of the oven until they have had suf-ficient time to cool. Other
surfaces of the appliance may become hot enough to cause burns, for example,
oven vent openings and surfaces near these openings, oven doors, and oven glass
window.
6. Take care to reset all worktop/oven/broiler burner controls to the OFF position
after use of the appliance.
OFF
Max
450
400
350
300
250
Symbols:
Oven Functions Selector
To reduce the risk of tipping of the appliance, it must be secured with
a properly installed anti-tip device. To check if the device is installed
properly, remove the appliance from the wall and verify that the
anti-tip device is engaged.
WARNING
Loading ...
Loading ...
Loading ...