Loading ...
Loading ...
Loading ...
4
inches
(mm)
DISCHARGE .................. 3” NPT, Vertical
LIQUID TEMP ................ 104°F (40°C) Continuous
MOTOR HOUSING ........ Cast Iron ASTM A-48, Class 30
VOLUTE ......................... Cast Iron ASTM A-48, Class 30
SEAL PLATE ................. Cast Iron ASTM A-48, Class 30
IMPELLER:
Design ...........2 Vane, Open with Pump out vanes
on Back side. Dynamically
balanced, ISO G6.3
Material ........ Cast Iron ASTM A-48, Class 30
SHAFT ............................ 416 Stainless Steel
SQUARE RINGS ............ Buna-N
HARDWARE .................. 300 Series Stainless Steel
PAINT ............................. Air dry enamel, top coat
SEAL Design .......... Inboard, Single Mechanical
with oil fi lled reservoir, secondary
exclusion seal
Material ........ Rotating Faces - Carbon
Stationary Faces - Ceramic
Elastomer - Buna-N
Hardware - 300 series stainless steel
CORD ENTRY ................ 25 Ft. (7.6m) Cord, Pressure
Grommet for sealing and strain relief
SPEED ........................... 1750 RPM, 60Hz (nominal)
UPPER BEARING:
Design .......... Single Row, Ball, Oil Lubricated
Load ............. Radial
LOWER BEARING:
Design .......... Single Row, Ball, Oil Lubricated
Load ............. Radial & Thrust
MOTOR: Design .......... NEMA L, Single phase,
Torque Curve, Oil Filled, Squirrel
Cage Induction
Insulation ...... Class B
SINGLE PHASE ............. Permanent Split Capacitor (PSC)
Includes overload protection in motor
OPTIONAL EQUIPMENT:
Seal Material, Impeller Trims, Additional Cord,
SECTION: A - PUMP SPECIFICATIONS:
IMPORTANT !
1.) DO NOT USE TO PUMP FLAMMABLE LIQUIDS.
2.) NSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN
ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT
INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED
MEDIA IS A COMMON OCCURRENCE.
Loading ...
Loading ...
Loading ...