Furrion FACT12LA-PS User Manual

Loading ...

3. Remove the control box off the

mounting frame by unscrewing the

two screws on the supporters of the

control box. (Fig. 4)

Fig. 4

4. Install the assembled mounting frame

and the lower duct divider into the

rooftop opening. Make sure the “THIS

WAY FRONT” mark is facing front

(the direction of the vehicle) while

installing. (Fig. 5)

Fig. 5

5. Fix the assembled mounting frame

and lower duct divider into the rooftop

unit using 4 bolts provided. (Fig. 6)

NOTE: If bolts are left loose there

may not be an adequate roof seal or

if over tightened, damage may occur

to the rooftop base or mounting

frame. Evenly tighten the four bolts

to a torque of 40 to 50 inch pounds.

This will compress the roof gasket to

approximately ½”.

Mounting Hole

Fig. 6

6. Pull to remove the film off the double

sided sticky tape on the inner side of

the lower duct divider. (Fig. 7)

Film

Fig. 7

7. Stick the upper duct divider into the

assembled mounting frame.

NOTE: Make sure the upper duct

divider is pressing against the ceiling

before finally sticking it. (Fig. 8)

Upper Duct

Divider

Fig. 8

Loading ...

Furrion FACT12LA-PS Air distribution box with LED light for Electronic Control Chill Air Conditioner System - White