Loading ...
Loading ...
Loading ...
STARTING AND STOPPING
Check before starting
Check that the support flange is not cracked due to fatigue
or due to being tightened too much. Discard the support
flange if it is cracked.
Ensure the locking nut has not lost its captive force. The
nut lock should have alocking force of at least 1.5 Nm.The
tightening torque of the locking nut should be 35-50 Nm.
Check that the blade guard is not damaged or cracked.
Replace the blade guard if it is exposed to impact or is
cracked.
Check that the trimmer head and trimmer guard are not
damaged or cracked. Replace the trimmer head or
trimmer guard if they have been exposed to impact or are
cracked.
Neveruse the machine without a guard nor with a
defective guard.
Starting and stopping
Q
Cold engine
Ignition:
Set the stop switch to the start position.
Choke: Set the choke control in the choke position.
Air purge: Press the air purge diaphragm repeatedly until fuel
begins to fill the diaphragm. The diaphragm need not be
completely filled.
16 - English
Loading ...
Loading ...
Loading ...