Loading ...
Loading ...
Loading ...
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE
WWW.KUCHT.COM
14
Important Notes to the Installer
1. Read all instrucons contained in these installaon instrucons before installing range.
2. Remove all packing material from the oven compartments before connecng the
electrical supply to the range
3. An-p brackets MUST be installed
4. Observe all governing codes and ordinances.
5. Make sure to leave these instrucons with the consumer.
Important Note to the Consumer
Keep these instrucons with your owner's guide for future reference.
IMPORTANT SAFETY INSTRUCTIONS
Installaon of this range must conform with local codes or, in the absence of local codes,
with the Naonal Fuel Gas Code ANSI Z223.1-latest edion.
This range
has been designed cerfied by the American Gas Associaon. As with any
appliance using gas and generang heat, there are certain safety precauons you should
follow. You will find them in the Use and Care Guide, read it carefully.
•Air curtain or other overhead hoods, which operate by blowing a downward air flow
on to a range, shall not be used in conjuncon with gas ranges other than when the hood
and range have been designed, tested and listen by an independent test laboratory for
use in combinaon with each other.
•Be sure your range is installed and grounded properly by a qualified installer or
service technician.
•This range must be electrically grounded in accordance with local codes or, in
their
absence, with the Naonal Electrical Code ANSI/NFPA No. 70—latest edion
•The installaon of appliances designed for manufactured (mobile) home installaon
must conform with Manufactured Home Construcon and Safety Standard, tle 24CFR,
part 3280 [Formerly the Federal Standard for Mobile Home Construcon and Safety, tle
24, HUD (part 280)] or when such standard is not applicable, the Standard for
Manufactured Home Installaon 1982 (Manufactured Home Sites, Communies and
Setups), ANSI Z225.1/NFPA 501Alatest edion, or with local codes.
•Make sure the wall coverings around the range can withstand the heat generated by
the range.
•Before installing the range in an area covered with linoleum or any other synthec
floor covering, make sure the floor covering can
withstand heat at least 90°F/32°C above
room temperature without shrinking, warping or discoloring. Do not install the range
Loading ...
Loading ...
Loading ...