Loading ...
Loading ...
Loading ...
- 4 -
Model Number
Technical Data
SWC546LBI
Capacity 5.3 ft
3
Voltage 110 ~ 120V
Current 1.0A
Frequency 60Hz
Protection class I
Climate class T/ST/N/SN
Input power 140W
Temperature Control Range
Upper Zone: 40 - 50°F (5 – 10°C)
Lower Zone: 50 - 64°F (10 – 18°C)
Net weight 105.6 lbs
Gross weight 114.4 lbs
Unit size (W × D × H) 23.7” x 22.6” x 33.6”
Packing size (W × D x H) 26.2” x 24.9” x 37.3”
Before using your wine cellar:
Installation Instructions
• Remove the exterior and interior packing.
•
This appliance can either stand alone or be built in. Front grille must be unobstructed.
• Before connecting the appliance to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
• Clean the interior surfaces with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance when
it is fully loaded.
• To level your appliance, adjust the front legs at the bottom of the appliance.
The Control Panel:
Operating Your Wine Cellar
• To set the upper zone temperature, press the UP and DOWN buttons on the left side
below the words Upper Zone (Zone I). Each press will adjust the temperature setting
by 1°C between 5 and 10°C, or 1°F between 40 and 50°F.
• To set the lower zone temperature, press the UP and DOWN buttons on the right side
below the words Lower Zone (Zone II). Each press will adjust the temperature setting
by 1°C between 10 and 18°C, or 1°F between 50 and 64°F.
• To turn the internal LED lighting on or off, press the LIGHT button on the right side.
• To switch the temperature display from Celsius degrees to Fahrenheit degrees or vice
versa, press the °C/°F button.
Loading ...
Loading ...
Loading ...